Scrap copper sells better compared to other recyclable materials because there is much need for copper in applications like plumbing, structural material, electrical components, decorative design and much more. Companies buy and recycle all sorts of copper and the good news is that you are offered a fair price for recycling. However, when selling Scrap copper you may not actually get the best prices for your recyclable material. The value of the recyclable material depends on grade of the material. Other factors that are typically taken into consideration are the materials that are attached to the metal. In this guide, you will find out how to sell your metal copper.
The best places to find scrap copper
First, you should consider old and new electronics. Older electronics are great sources of recyclable material because they are made mostly from pure copper. Inside electronics and computers you will find a great you will find a great amount of insulated wires. All you have to do is remove the parts and cut the wires with a pair of scissors. TVs and monitors are not accepted by recycling yards will not accept them, but this does not mean that you should not try. Another place you should look is. Last but not least, you can check at construction sites, but you should pay attention to the fact that you cannot simple take what you find there. You have to get the permission of the site owner to be able to take them. Unless you ask for permission, the owner can press charges against you.
Scrap copper prices
The prices for recyclable material vary from country to country. Owing to the fact that there are so many different grades and types of pure metal, the price estimate varies as well. If you are not informed about the metal, then will not be able to find the best price for your recyclable material. In the US you can get around $2, 40 for bare bright copper, while in Canada for the same metal is priced at $2, 75. Let’s take another example: in the US electric motors are valued at $0, 25, while in Canada the price for electric motors is 0, 17. This basically means that each country is with its own cost. The pricing levels are directly linked to the grade of the recyclable material. If your metal is at least 99% pure, you can expect to be rewarded substantially.
Getting the best scrap copper prices
If you are planning on turning in your recyclable material, you will definitely need to sort through your materials. What you have to do is ensure that the copper is clean. This means that it should not present corrosion or coatings of any kind. You will most likely find the metal covered with dirt, so make sure to clean it. Do not burn the coating because you actually risk degrading the metal. Keep in mind that your recyclable material should be appropriately sorted, otherwise you will not make the most of your possessions.